Reply to thread

Message: <blockquote data-quote="akheathen" data-source="post: 7638832" data-attributes="member: 629234"><p>x2 on gooder pics.  anyways, when you replaced all the power fets, you should have replaced all the gate resistors that went to them (circled in white"little burnt things")  if you can still read the color code off the good ones, then you can just get all 12 new ones.  they are the same.  when you say "like 2.5"  what does that exactly mean?  does one read lower?  which legs?  yes, they are probably bad.  and, the same thing.  those big resistors attached to them get replaced with those, too.  if it does power up, read the dc voltage from ground, to both sides of each gate resistor, and then read dc voltage across the speaker terminals.</p></blockquote><p></p>

Top