Reply to thread

Message

<blockquote data-quote="jdeaton01" data-source="post: 7638109" data-attributes="member: 637489"><p>ok im repairing a sony xplod 1600 watt amp .xm-ds1600p5 is the model number. when hook the power and the gound up and turn it on it comes on fine with the green light. when i hook the rca cables up the amp goes into protection. doesnt blow any fuses or anything just goes into protection. i have fixed a few problems on the amp so far. i replaced the transitors circled in red one of them was blown so i replaced all of them. i dont know what the ones circled in green should read and dont know what they are to. they are labeled d1 d2 d3 and d4. the ones i replaced are labeled fet 1-12. the ones circled in yellow may be bad but im not sure. when i have my multi-meter on 200 the ones i replaced read around 101.5 and the ones circled in yellow read like 02.5. should all of these read about the same???? do i need to replace the ones in yellow too?? and another thing the little things circled in white look burnt . helpppppp plz</p></blockquote><p></p>

[QUOTE="jdeaton01, post: 7638109, member: 637489"] ok im repairing a sony xplod 1600 watt amp .xm-ds1600p5 is the model number. when hook the power and the gound up and turn it on it comes on fine with the green light. when i hook the rca cables up the amp goes into protection. doesnt blow any fuses or anything just goes into protection. i have fixed a few problems on the amp so far. i replaced the transitors circled in red one of them was blown so i replaced all of them. i dont know what the ones circled in green should read and dont know what they are to. they are labeled d1 d2 d3 and d4. the ones i replaced are labeled fet 1-12. the ones circled in yellow may be bad but im not sure. when i have my multi-meter on 200 the ones i replaced read around 101.5 and the ones circled in yellow read like 02.5. should all of these read about the same???? do i need to replace the ones in yellow too?? and another thing the little things circled in white look burnt . helpppppp plz [/QUOTE]

Verification