Reply to thread

Message

<blockquote data-quote="silvercookie" data-source="post: 3450301" data-attributes="member: 581433">ok last time just to make sure* Subwoofer Size:&nbsp;&nbsp; 12&quot;* Impedance:&nbsp;&nbsp; 4 ohms* Dual Voice Coil:&nbsp;&nbsp; Yes* Peak Power Handling:&nbsp;&nbsp; 800 watts* RMS Power Handling:&nbsp;&nbsp; 400 watts* Woofer Surround:&nbsp;&nbsp; Santoprene Rubber* Woofer Composition:&nbsp;&nbsp; N/A* Sealed Box Volume:&nbsp;&nbsp; 1.0 - 4.6 cu. ft.* Ported Box Volume:&nbsp;&nbsp; 1.75 - 2.25 cu. ft.* Sensitivity:&nbsp;&nbsp; 86.7 dB* Frequency Response:&nbsp;&nbsp; 25 - 500Hz* Xmax (millimeters):&nbsp;&nbsp; N/A* Top Mount Depth:&nbsp;&nbsp; 6-3/16&quot;* Cutout Diameter:&nbsp;&nbsp; 11-1/8&quot;* Warranty:&nbsp;&nbsp; 1-year Authorized Manufacturer&#039;sthose are the specs of the 12&quot; kicker cvrso those say 4 ohm and you said wire them down to 1 ohm does that mean the ohms of the sub are reduced or the ohms on the amplifier are reduced. thats the only thing that is confusing me.but then the amp says 1000w@1ohm. that means if i hooked up 2 subs then each sub would be getting about 500w RMS correct?so if i had 2 4ohm subs and wired them to 2 ohm. that would mean each sub is getting around 350-400w RMS correct?</blockquote>

[QUOTE="silvercookie, post: 3450301, member: 581433"] ok last time just to make sure * Subwoofer Size: 12" * Impedance: 4 ohms * Dual Voice Coil: Yes * Peak Power Handling: 800 watts * RMS Power Handling: 400 watts * Woofer Surround: Santoprene Rubber * Woofer Composition: N/A * Sealed Box Volume: 1.0 - 4.6 cu. ft. * Ported Box Volume: 1.75 - 2.25 cu. ft. * Sensitivity: 86.7 dB * Frequency Response: 25 - 500Hz * Xmax (millimeters): N/A * Top Mount Depth: 6-3/16" * Cutout Diameter: 11-1/8" * Warranty: 1-year Authorized Manufacturer's those are the specs of the 12" kicker cvr so those say 4 ohm and you said wire them down to 1 ohm does that mean the ohms of the sub are reduced or the ohms on the amplifier are reduced. thats the only thing that is confusing me. but then the amp says 1000w@1ohm. that means if i hooked up 2 subs then each sub would be getting about 500w RMS correct? so if i had 2 4ohm subs and wired them to 2 ohm. that would mean each sub is getting around 350-400w RMS correct? [/QUOTE]

Verification