Reply to thread

Message: <blockquote data-quote="helotaxi" data-source="post: 375969" data-attributes="member: 550915"><p>Two things to check.  One, make sure that the subs are wired in phase to each other.  In other words, check to make sure that the + wire going from the amp is going to the + terminal on the sub.  If the subs are out of phase with each other, then they will cancel each other out and will sound about how you describe.  Two, make sure they are each getting the same signal from the amp.  The best way to do this would be to wire the subs in series and bridge the amp.  You will get the same power you are getting now but you will not have the cancelation possibilities because the subs are getting the same signal.</p></blockquote><p></p>

Top