Reply to thread

Message

<blockquote data-quote="jim K" data-source="post: 526697" data-attributes="member: 556492">Sup. Never posted here before.&nbsp; Looks like a great site.&nbsp; I looked all over the net till I found here.&nbsp; Still have a few questions I cant find the answers to.&nbsp; I dont know a great deal but what I want to do is run a two channel amp 125RMS per channel at 4 Ohm with a sub on each channel.&nbsp; I am thinking of going with 4 Ohm SVC subs or Dual VC subs 4 Ohms each coil.&nbsp; I&#039;m not sure which is the better setup.My understanding is I can go with the DVC subs and drop down to 2 Ohms for more power or up to 8 Ohms for less.&nbsp; I like the 2 Ohm idea but do not know if it will work on a 2 channel amp in this way.&nbsp; I&#039;ve looked on the JL page and saw diagrams for dropping down two 2 Ohms (or whatecver you want)with aDVC Sub(s) but all the diagarms look like they are for Single Channel Amps.I am not wanting to bridge my amp but run on sub on each channel.&nbsp; SVC or DVC. will the DVC one on each channel at 2 ohm work.&nbsp; Amp is supposed to be 2 ohm Stable.&nbsp; Would this setup still be considered 2 ohm.Also I know why 2 ohm is better but I dont know what the Drawbacks are.&nbsp; More Distortion? ECT.Hope I asked my questions right and thanks for any thoughts or help.&nbsp; //content.invisioncic.com/y282845/emoticons/imdaman.gif.bc6c552e19aa4ad8c47461144f40eb1a.gif</blockquote>

[QUOTE="jim K, post: 526697, member: 556492"] Sup. Never posted here before. Looks like a great site. I looked all over the net till I found here. Still have a few questions I cant find the answers to. I dont know a great deal but what I want to do is run a two channel amp 125RMS per channel at 4 Ohm with a sub on each channel. I am thinking of going with 4 Ohm SVC subs or Dual VC subs 4 Ohms each coil. I'm not sure which is the better setup. My understanding is I can go with the DVC subs and drop down to 2 Ohms for more power or up to 8 Ohms for less. I like the 2 Ohm idea but do not know if it will work on a 2 channel amp in this way. I've looked on the JL page and saw diagrams for dropping down two 2 Ohms (or whatecver you want)with a DVC Sub(s) but all the diagarms look like they are for Single Channel Amps. I am not wanting to bridge my amp but run on sub on each channel. SVC or DVC. will the DVC one on each channel at 2 ohm work. Amp is supposed to be 2 ohm Stable. Would this setup still be considered 2 ohm. Also I know why 2 ohm is better but I dont know what the Drawbacks are. More Distortion? ECT. Hope I asked my questions right and thanks for any thoughts or help. [IMG]//content.invisioncic.com/y282845/emoticons/imdaman.gif.bc6c552e19aa4ad8c47461144f40eb1a.gif[/IMG] [/QUOTE]

Verification