Reply to thread

Message: <blockquote data-quote="trumpet" data-source="post: 8154576" data-attributes="member: 628688"><p>One thing to consider is if your 3-way speakers are all close together on the door panels you may be happy using the passive crossovers. Then you can either bridge the XD1000/5v2 for more power on the speakers or use rear speakers and run them at 100W x 4. You can't run a 3-way speaker set and a subwoofer off a 3-way active head unit unless two pairs of speakers are combined with passive crossovers. You might be ok wiring just the mids and tweeters on the Focal crossovers, but I don't know if they're designed to work well that way with no load on the woofer terminals.</p></blockquote><p></p>

Top