Reply to thread

Message

<blockquote data-quote="cheeto" data-source="post: 4135433" data-attributes="member: 583683">Oh I gotcha, I was reading that wrong.I know mid loud shouldn&#039;t have been on with 600rms, I was testin it to see what would happen.&nbsp; I was really mad at the time cuz I was all juiced about getting a 15 and making my own box and stuff, only to find out the 12w3 was louder.//content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif:verymad://content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gifmore infoimpedance = 2 ohms, 600rmsbox = 4.5 cu ft, ~38 hzTo set my gains, I took the speaker wire out, put the two probes from the DMM in, turned the HU to 42 (about 3/4 the hu&#039;s full volume), and slowly turned the gain to around 34 volts (that number came from subwoofertools.com)I really need to find an oscope around here to test to see if its clipping.</blockquote>

[QUOTE="cheeto, post: 4135433, member: 583683"] Oh I gotcha, I was reading that wrong. I know mid loud shouldn't have been on with 600rms, I was testin it to see what would happen. I was really mad at the time cuz I was all juiced about getting a 15 and making my own box and stuff, only to find out the 12w3 was louder.[IMG]//content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif[/IMG]:verymad:[IMG]//content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif[/IMG] more info impedance = 2 ohms, 600rms box = 4.5 cu ft, ~38 hz To set my gains, I took the speaker wire out, put the two probes from the DMM in, turned the HU to 42 (about 3/4 the hu's full volume), and slowly turned the gain to around 34 volts (that number came from subwoofertools.com) I really need to find an oscope around here to test to see if its clipping. [/QUOTE]

Verification