Reply to thread

Message

<blockquote data-quote="audiobaun" data-source="post: 8259283" data-attributes="member: 634282"><p>Most deff not enough power to push the subs&nbsp; properly.Might use that on your front stage or?Sell it.Thats just me.Ive never liked any of Kenwoods amps that Ive tried over the years.Not enough power.The only Kenwood amps I ever liked were back in like 1990-1992.Look for a decent 2k-1600 rms amp up to 2500 rms would be ideal.You could prob find a decent HiFonics amp within A Budget minding. You will more than likely need to add another battery,and run 0 ga wiring,and deff look into doing the ELD bypass if you feel comfortable with it.There is a tutorial on here or on Honda forum.Asforthe enclosure??It could work, but work well,and surfice very nicely??Prob not.You can get a build sheet from Buck on here for the enclosure,to get the best out of your subs performance.Build the enclosure yourself for arounf $150 bucks wrapped with materials verses having one made locally and out of tune more than likely and not to specs for about $300 smacks bare wood(5/8) more than likely</p></blockquote><p></p>

[QUOTE="audiobaun, post: 8259283, member: 634282"] Most deff not enough power to push the subs properly.Might use that on your front stage or?Sell it.Thats just me.Ive never liked any of Kenwoods amps that Ive tried over the years.Not enough power.The only Kenwood amps I ever liked were back in like 1990-1992.Look for a decent 2k-1600 rms amp up to 2500 rms would be ideal.You could prob find a decent HiFonics amp within A Budget minding. You will more than likely need to add another battery,and run 0 ga wiring,and deff look into doing the ELD bypass if you feel comfortable with it.There is a tutorial on here or on Honda forum.Asforthe enclosure??It could work, but work well,and surfice very nicely??Prob not.You can get a build sheet from Buck on here for the enclosure,to get the best out of your subs performance.Build the enclosure yourself for arounf $150 bucks wrapped with materials verses having one made locally and out of tune more than likely and not to specs for about $300 smacks bare wood(5/8) more than likely [/QUOTE]

Verification