Reply to thread

Message

<blockquote data-quote="Nathanbr11" data-source="post: 8653794" data-attributes="member: 675488">Alright guys I&#039;ve been contemplating this build for awhile and finally broke down and decided to seek some advice. I currently have the sub but I&#039;m needing to build a box. (Not the first box I&#039;ve built) I&#039;m just looking to step it up a little with this one. I have a 98 c1500 ext cab so it&#039;ll be in the back but I&#039;m looking at getting either a skar 1500 or 2000 watt amp as an upgrade from my current kenwood 800. I&#039;m thinking just a ported box with a kerf port (going to be using 3/4&quot; mdf) but my main concern is tuning and accounting for the over powering. It&#039;s going to be mostly a daily bumper but would like to see what numbers it can pull. Thanks in advance.Edit: I know its rated for 750rms but we all know they&#039;re WAY under rated so I&#039;m also curious how it would do if 2000 watts. Not necessarily worried if I blow it eventually because that&#039;s just a good excuse for an upgrade! </blockquote>

[QUOTE="Nathanbr11, post: 8653794, member: 675488"] Alright guys I've been contemplating this build for awhile and finally broke down and decided to seek some advice. I currently have the sub but I'm needing to build a box. (Not the first box I've built) I'm just looking to step it up a little with this one. I have a 98 c1500 ext cab so it'll be in the back but I'm looking at getting either a skar 1500 or 2000 watt amp as an upgrade from my current kenwood 800. I'm thinking just a ported box with a kerf port (going to be using 3/4" mdf) but my main concern is tuning and accounting for the over powering. It's going to be mostly a daily bumper but would like to see what numbers it can pull. Thanks in advance. Edit: I know its rated for 750rms but we all know they're WAY under rated so I'm also curious how it would do if 2000 watts. Not necessarily worried if I blow it eventually because that's just a good excuse for an upgrade! [/QUOTE]

Verification