Reply to thread

Message

<blockquote data-quote="cyn" data-source="post: 7967886" data-attributes="member: 635432">Okay...&nbsp;&nbsp; Starting the box build... I&#039;m going with this design here that way if I decide to change up and go with a tube port I can later on...Driver PropertiesName: Shocker ExtremeType: Standard one-way driverCompany: Shocker ExtremeNo. of Drivers = 2Mounting = StandardWiring = ParallelDual voice coils = separateFs =&nbsp; 29.61 HzQms =&nbsp; 7.636Vas =&nbsp; 56.97 litersCms =&nbsp; 0.11 mm/NMms =&nbsp; 267.8 gRms =&nbsp; 6.399 kg/sP-Dia =&nbsp; 277.3 mmSd =&nbsp; 603.9 sq.cmQes =&nbsp; 0.367Re =&nbsp; 4.01 ohmsLe =&nbsp; 6.47 mHZ =&nbsp; 87.4 ohmsBL =&nbsp; 23.32 TmQts =&nbsp; 0.35no =&nbsp; 0.38 %1-W SPL =&nbsp; 87.95 dB2.83-V SPL =&nbsp; 90.83 dB-----------------------------------------Box PropertiesName:Type: Vented BoxShape: Prism, squareVb =&nbsp; 3.52 cu.ftFb =&nbsp; 36.41 HzF3 =&nbsp; 34.41 HzFill = noneNo. of Vents = 1Vent shape = rectangleVent ends = no flushHv =&nbsp; 6 inWv =&nbsp; 6 inLv =&nbsp; 18 in</blockquote>

[QUOTE="cyn, post: 7967886, member: 635432"] Okay... Starting the box build... I'm going with this design here that way if I decide to change up and go with a tube port I can later on... Driver Properties Name: Shocker Extreme Type: Standard one-way driver Company: Shocker Extreme No. of Drivers = 2 Mounting = Standard Wiring = Parallel Dual voice coils = separate Fs = 29.61 Hz Qms = 7.636 Vas = 56.97 liters Cms = 0.11 mm/N Mms = 267.8 g Rms = 6.399 kg/s P-Dia = 277.3 mm Sd = 603.9 sq.cm Qes = 0.367 Re = 4.01 ohms Le = 6.47 mH Z = 87.4 ohms BL = 23.32 Tm Qts = 0.35 no = 0.38 % 1-W SPL = 87.95 dB 2.83-V SPL = 90.83 dB ----------------------------------------- Box Properties Name: Type: Vented Box Shape: Prism, square Vb = 3.52 cu.ft Fb = 36.41 Hz F3 = 34.41 Hz Fill = none No. of Vents = 1 Vent shape = rectangle Vent ends = no flush Hv = 6 in Wv = 6 in Lv = 18 in [/QUOTE]

Verification