Reply to thread

Message

<blockquote data-quote="cyn" data-source="post: 7967501" data-attributes="member: 635432">Okay...&nbsp;&nbsp; after jacking around on Bassbox again... I came up with around 3.6ish net with a 36hz tuning..Box PropertiesName:Type: Vented BoxShape: Prism, squareVb =&nbsp; 3.639 cu.ftFb =&nbsp; 35.81 HzF3 =&nbsp; 34.08 HzFill = noneNo. of Vents = 1Vent shape = rectangleVent ends = no flushHv =&nbsp; 6 inWv =&nbsp; 6 inLv =&nbsp; 18 inWill more than likely start cutting everything in the morning and building..This will be going in an Impala... sub / port back &quot;facing the trunk opening&quot;&nbsp;&nbsp; I thought about Sub/Port up and blowing through the rear deck.. but that means I have to change the Height/Depth of the box.. and ehh... Not having an 18&quot; Depth box X 14.5&quot; tall</blockquote>

[QUOTE="cyn, post: 7967501, member: 635432"] Okay... after jacking around on Bassbox again... I came up with around 3.6ish net with a 36hz tuning.. Box Properties Name: Type: Vented Box Shape: Prism, square Vb = 3.639 cu.ft Fb = 35.81 Hz F3 = 34.08 Hz Fill = none No. of Vents = 1 Vent shape = rectangle Vent ends = no flush Hv = 6 in Wv = 6 in Lv = 18 in Will more than likely start cutting everything in the morning and building.. This will be going in an Impala... sub / port back "facing the trunk opening" I thought about Sub/Port up and blowing through the rear deck.. but that means I have to change the Height/Depth of the box.. and ehh... Not having an 18" Depth box X 14.5" tall [/QUOTE]

Verification