Reply to thread

Message: <blockquote data-quote="Moble Enclosurs" data-source="post: 7553039" data-attributes="member: 634917"><p>Did I say tuning, Im sorry, what I meant was cutoff when in a box, but low impedance when free air. I dont know if I said that right or not when typed. I want to clear that up. So, if doing this while the sub is in the box, it should be at LF cutoff, where excursion starts to be a concern below that. And yes, HP should be higher. Also, dont use 50Hz, because below that, distortion and over excursion may be an issue AS LONG AS....tuning is lower than 50Hz.</p></blockquote><p></p>

Top