Reply to thread

Message: <blockquote data-quote="VereChronicus" data-source="post: 1446139" data-attributes="member: 565864"><p>difference is the Qts and BL, Qes and BL are affected by wiring the subs one way or the other. Qts is changed because of the Qes. BL drops when wired in parallel and goes up when wired in series. For small/medium sealed, you normally want the BL lower like most of the "SQ" subs, loose suspension, huge gap, limp surround and low Fs and weak motor. For vented, if you don't have a suspension and a motor/coil with enough restoring force, you'll just launch the sub. I never wire in parallel on a DVC if at all possible using whatever equipment I have to work with.</p></blockquote><p></p>

Top