Reply to thread

Message

<blockquote data-quote="inferno1985" data-source="post: 8364060" data-attributes="member: 639224">i have pos to pos and neg to neg&nbsp; wires connecting both vc on each subsubs are not jumped together n any wayeach subs is connect to a terminal on the back of box. i have both terminals running to the same channel on the amp.well the way that i have them wired up seems to be at a 4 ohm load?one sub has 2 vc,&nbsp; i have the pos from one terminal running to the pos to the other term and same with neg, i then have that sub connected to the terminal of the box.same goes with the other sub.both subs have the pos and neg connected to both vc terminals but run to their own seperate box terminal each box terminal has its own set of wires running to amp.so thats a 4 ohm load then?i would need to jump both subs between the enclosures so that they are wired together and use only 1 box terminal to create a 1 ohm load?<a href="http://www.avsforum.com/photopost/data/2227460/4/4f/4f75632d_4ohm_to_2ohm.PNG" target="_blank">http://www.avsforum.com/photopost/data/2227460/4/4f/4f75632d_4ohm_to_2ohm.PNG</a>that is how my subs are wired. but the amp is a mono. problem right?</blockquote>

[QUOTE="inferno1985, post: 8364060, member: 639224"] i have pos to pos and neg to neg wires connecting both vc on each sub subs are not jumped together n any wayeach subs is connect to a terminal on the back of box. i have both terminals running to the same channel on the amp. well the way that i have them wired up seems to be at a 4 ohm load? one sub has 2 vc, i have the pos from one terminal running to the pos to the other term and same with neg, i then have that sub connected to the terminal of the box. same goes with the other sub. both subs have the pos and neg connected to both vc terminals but run to their own seperate box terminal each box terminal has its own set of wires running to amp. so thats a 4 ohm load then? i would need to jump both subs between the enclosures so that they are wired together and use only 1 box terminal to create a 1 ohm load? [URL="http://www.avsforum.com/photopost/data/2227460/4/4f/4f75632d_4ohm_to_2ohm.PNG"]http://www.avsforum.com/photopost/data/2227460/4/4f/4f75632d_4ohm_to_2ohm.PNG[/URL] that is how my subs are wired. but the amp is a mono. problem right? [/QUOTE]

Verification