Reply to thread

Message

<blockquote data-quote="pwnt by pat" data-source="post: 868664" data-attributes="member: 556604">&#039;cause it would be stupid to spend another 150-200 a second amp capable of 150x2@4 when there are two unused channels on a four channel amp that does 150x4@2.100hz from the id3s might be all we need in this application.&nbsp; There are 6.5 midbasses up front but they don&#039;t produce low enough with enough output.&nbsp; Down to 100hz just might be the sweet spot.How about the Rl-I&#039;s?&nbsp; I talked with a guy over there a couple of times and he said they go &quot;pretty **** high&quot; but thinks they might be a little muddy for dedicated midbass, even only upto 200hz.I also put in an email to RE asking them if they could do some hodgepodgeing with some non-RE woofers.&nbsp; Perhaps they can come up with a woofer-RE hybred like they can do with the Hecca-XXX.&nbsp; I will see soon, hopefully.&nbsp; I&#039;ve also contacted various manufactuers of prominant looking drivers but they refuse to do any non-factory work.</blockquote>

[QUOTE="pwnt by pat, post: 868664, member: 556604"] 'cause it would be stupid to spend another 150-200 a second amp capable of 150x2@4 when there are two unused channels on a four channel amp that does 150x4@2. 100hz from the id3s might be all we need in this application. There are 6.5 midbasses up front but they don't produce low enough with enough output. Down to 100hz just might be the sweet spot. How about the Rl-I's? I talked with a guy over there a couple of times and he said they go "pretty **** high" but thinks they might be a little muddy for dedicated midbass, even only upto 200hz. I also put in an email to RE asking them if they could do some hodgepodgeing with some non-RE woofers. Perhaps they can come up with a woofer-RE hybred like they can do with the Hecca-XXX. I will see soon, hopefully. I've also contacted various manufactuers of prominant looking drivers but they refuse to do any non-factory work. [/QUOTE]

Verification