Reply to thread

Message

<blockquote data-quote="DJ Riggz" data-source="post: 529144" data-attributes="member: 556233">Ok here&#039;s what i&#039;ve got:1 12&quot; Eclipse 88120DVC 500w rms 1000w peak (2x4ohm)1 Memphis MC1000D 600w rms (2ohm)I&#039;ve searched around for info on this for over a week. I want about a 50/50 split with SQ/SPL. Eclipse recommends i put the sub in a small sealed enclosure in the range of 0.5ftÂ³ to 1.0ftÂ³. I want to hit the lows and have some hard thump. I&#039;d also like pretty tight bass. So my questions are: Should i stick to sealed or try a finely tuned ported/vented? Will it not do well in anything other then a seald box? Thanks in advance!Specs:88120DVCSize: 12&quot;DC-R: 3.1ohm/coilFs: 27hzQts: 0.30Vas: 3.20ftÂ³SPL: 89.4 dBQes: 0.322Qms: 5.0Sd: 0.0511MÂ²Xmax: 1.30&quot;Displacement: 0.10ftÂ³</blockquote>

[QUOTE="DJ Riggz, post: 529144, member: 556233"] Ok here's what i've got: 1 12" Eclipse 88120DVC 500w rms 1000w peak (2x4ohm) 1 Memphis MC1000D 600w rms (2ohm) I've searched around for info on this for over a week. I want about a 50/50 split with SQ/SPL. Eclipse recommends i put the sub in a small sealed enclosure in the range of 0.5ftÂ³ to 1.0ftÂ³. I want to hit the lows and have some hard thump. I'd also like pretty tight bass. So my questions are: Should i stick to sealed or try a finely tuned ported/vented? Will it not do well in anything other then a seald box? Thanks in advance! Specs: 88120DVC Size: 12" DC-R: 3.1ohm/coil Fs: 27hz Qts: 0.30 Vas: 3.20ftÂ³ SPL: 89.4 dB Qes: 0.322 Qms: 5.0 Sd: 0.0511MÂ² Xmax: 1.30" Displacement: 0.10ftÂ³ [/QUOTE]

Verification