Reply to thread

Message

<blockquote data-quote="anarche" data-source="post: 4520055" data-attributes="member: 592478">Hello Everyone,I recently purchased a Scosche SLC4 LOC to give my stock HU (base model) pre-amps. After splicing into the harness for RR and RL and hooking up the scosche I&#039;m getting surprisingly good results. However I&#039;m running into an issue I hope someone here can address.I&#039;m unable to hook both RCA&#039;s running out of the LOC to my amp. With only RR hooked up I get perfect sound, with only RL hooked up I get perfect sound. However when I hook both up to the amp, I lose about 80% of the power.I&#039;ve double checked the splices into the harness, and every other component in the system I&#039;m unable to diagnose this problem. It seems to me that because RR or RL work fine by themselves all my wiring is fine.If anyone could offer some insight on what else I could try to troubleshoot this, please let me know.Thanks,AnarchE</blockquote>

[QUOTE="anarche, post: 4520055, member: 592478"] Hello Everyone, I recently purchased a Scosche SLC4 LOC to give my stock HU (base model) pre-amps. After splicing into the harness for RR and RL and hooking up the scosche I'm getting surprisingly good results. However I'm running into an issue I hope someone here can address. I'm unable to hook both RCA's running out of the LOC to my amp. With only RR hooked up I get perfect sound, with only RL hooked up I get perfect sound. However when I hook both up to the amp, I lose about 80% of the power. I've double checked the splices into the harness, and every other component in the system I'm unable to diagnose this problem. It seems to me that because RR or RL work fine by themselves all my wiring is fine. If anyone could offer some insight on what else I could try to troubleshoot this, please let me know. Thanks, AnarchE [/QUOTE]

Verification