Reply to thread

Message: <blockquote data-quote="noob with an RS" data-source="post: 2056425" data-attributes="member: 558925"><p>set voltmeter to read DC voltage.. red lead goes to battery positive and black lead goes to battery negative. then at the amp.. the positive wire coming from the battery goes to the red lead and the negative wire coming from the battery goes to the black lead. you should get the same readings at the battery and at the amp. if you get a lower reading at the amp, or no reading at all, then there's something wrong between the battery and amp..</p></blockquote><p></p>

Top