Reply to thread

Message

<blockquote data-quote="Nut Hair Trick" data-source="post: 6072056" data-attributes="member: 610343">I know absolutely nothing about them but I am about to purchase my first one for my present sub enclosure and others to follow. Therefore, I have some questions.How do you see what you&#039;re cutting when using one? Everyone I looked at at Lowes had a bunch of stuff up top, and then a base, with little visabilty to see what you&#039;re cutting. Do they(most) come with a special sight that you look into while cutting?Double baffle board cutting. I&#039;ve seen people cut circles in their double baffled enclosure that would go all the way into the first baffle and be like 3/4&quot; wide. What bit do I use for that? Mortison? What type bit do I use to finish the hole that that speaker will actually drop down into? After cutting the lip part on the top baffle, I&#039;ve seen people leave the inside circle of the top baffle. Do you cut around that?I plan to purchase the Jasper Jig from the Parts Express site so I should at least be able to get the important hole cut<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile&nbsp; &nbsp; :)" loading="lazy" data-shortname=":)" />Rounding corners, what bit and size to round them thangs?If someone could give me an idea of the bits need for different styles of enclosure builds, and it&#039;s function, that would be lovely. Thanks for any help guys.</blockquote>

[QUOTE="Nut Hair Trick, post: 6072056, member: 610343"] I know absolutely nothing about them but I am about to purchase my first one for my present sub enclosure and others to follow. Therefore, I have some questions. How do you see what you're cutting when using one? Everyone I looked at at Lowes had a bunch of stuff up top, and then a base, with little visabilty to see what you're cutting. Do they(most) come with a special sight that you look into while cutting? Double baffle board cutting. I've seen people cut circles in their double baffled enclosure that would go all the way into the first baffle and be like 3/4" wide. What bit do I use for that? Mortison? What type bit do I use to finish the hole that that speaker will actually drop down into? After cutting the lip part on the top baffle, I've seen people leave the inside circle of the top baffle. Do you cut around that? I plan to purchase the Jasper Jig from the Parts Express site so I should at least be able to get the important hole cut:) Rounding corners, what bit and size to round them thangs? If someone could give me an idea of the bits need for different styles of enclosure builds, and it's function, that would be lovely. Thanks for any help guys. [/QUOTE]

Verification