Reply to thread

Message: <blockquote data-quote="BrianChia" data-source="post: 4567925" data-attributes="member: 576132">HD will do almost all the cuts for you now, but expect +/- 1/8"-1/2" depending on who does them and how careful they are. If you want to help them help you I would suggest that you go ahead and the draw the lines on panel which will help reduce their rate of error. Remember to account for the kerf width and indicate which side of the line to cut on.Usually I just have them cut the wood so it will fit in my car, leaving 1-2" of overhang for each piece, then I use my own saw to cut each piece to the right size. The scraps are them useful to use for bracing or building other things.</blockquote>

Top