Reply to thread

Message: <blockquote data-quote="sammy1" data-source="post: 615081" data-attributes="member: 557782"><p>ok, you should definitley dampen the doors, and anything that doesn't move. a lot of cutting and mesure is going to be needed for this job, you wont be able to just cut one sheet and apply it to the door. you'll have to take your time with this job and just cut as big of a sheet as you can without affecting any of the mechanical parts. thats all there is to it....just very time consuming and have a lot of patience with it...</p></blockquote><p></p>

Top