Reply to thread

Message

<blockquote data-quote="AltarCrystal" data-source="post: 2996417" data-attributes="member: 576763">Alright, I&#039;ve recently started redoing my whole system. I DID have a MACH 460 system, which wasn&#039;t TOO bad for stock, but I wanted something good.Now, I already replaced the door speakers with Alpine Type-S&#039;s, and am running them off a Diamond 400.1. Also, as you can see in my sig, I&#039;m gonna be puttign in 2 DD1510&#039;s.Right now, in the rear, only the tweaters work for some reason, rear mids don&#039;t. Should I replaces the mids and tweaters? Or since I&#039;ve read leaving out the rears will help sound from the subs enter the cab more easily, should I just leave them out?My other problem, in the MACH system, there&#039;s a pair of tweaters on the top of the door, in a fitted box. Reason I can&#039;t just take it out? The door panel&#039;s cut and looks horrid without it. These don&#039;t work either thanks to some stupid move by my dealership when I had them replace a blown mid (Put the speaker from the normal stock system in with the mach system, much smaller, different impedence //content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif). I want to defiently take off the MACH emblem (Why endorse something I&#039;m not running?) and put new material over the encloser (As there are three holes from the emblem). Should I just go ahead and replace the tweaters with something a little nicer?</blockquote>

[QUOTE="AltarCrystal, post: 2996417, member: 576763"] Alright, I've recently started redoing my whole system. I DID have a MACH 460 system, which wasn't TOO bad for stock, but I wanted something good. Now, I already replaced the door speakers with Alpine Type-S's, and am running them off a Diamond 400.1. Also, as you can see in my sig, I'm gonna be puttign in 2 DD1510's. Right now, in the rear, only the tweaters work for some reason, rear mids don't. Should I replaces the mids and tweaters? Or since I've read leaving out the rears will help sound from the subs enter the cab more easily, should I just leave them out? My other problem, in the MACH system, there's a pair of tweaters on the top of the door, in a fitted box. Reason I can't just take it out? The door panel's cut and looks horrid without it. These don't work either thanks to some stupid move by my dealership when I had them replace a blown mid (Put the speaker from the normal stock system in with the mach system, much smaller, different impedence [IMG]//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif[/IMG]). I want to defiently take off the MACH emblem (Why endorse something I'm not running?) and put new material over the encloser (As there are three holes from the emblem). Should I just go ahead and replace the tweaters with something a little nicer? [/QUOTE]

Verification