Reply to thread

Message

<blockquote data-quote="Slody4Futbol" data-source="post: 358011" data-attributes="member: 551839">Hey.. not too familiar with these alarms... and I don&#039;t know if you&#039;ve figured it out yet or not but here&#039;s my shot at this...The small black wire MAY BE an antenna wire... does the alarm come with an external antenna? If not this may be the antenna...The 2 wires coming from the siren... Red wire goes to the Siren output on the alarm... Black.. ground it..Parking lights... Get a wiring diagram for your car... and see what wire it says... wherever it is will test positive when you turn your lights on... splice into that wire...Door trigger is the doorpin basically... you need to find out if your car has negative or positive door pins... hoodpin is if you want a hoodpin... you can mount a pin under the hood so if anyone pops your hood the alarm will go off... the starter output is either 12 volts or hook it to the wire in the ignition harness for the starter... That&#039;s all I can think of off the top of my head... and for 12 volts... just use the wire in the ignition harness... or any wire that tests 12 volts positive all the time...</blockquote>

[QUOTE="Slody4Futbol, post: 358011, member: 551839"] Hey.. not too familiar with these alarms... and I don't know if you've figured it out yet or not but here's my shot at this... The small black wire MAY BE an antenna wire... does the alarm come with an external antenna? If not this may be the antenna... The 2 wires coming from the siren... Red wire goes to the Siren output on the alarm... Black.. ground it.. Parking lights... Get a wiring diagram for your car... and see what wire it says... wherever it is will test positive when you turn your lights on... splice into that wire... Door trigger is the doorpin basically... you need to find out if your car has negative or positive door pins... hoodpin is if you want a hoodpin... you can mount a pin under the hood so if anyone pops your hood the alarm will go off... the starter output is either 12 volts or hook it to the wire in the ignition harness for the starter... That's all I can think of off the top of my head... and for 12 volts... just use the wire in the ignition harness... or any wire that tests 12 volts positive all the time... [/QUOTE]

Verification