Reply to thread

Message: <blockquote data-quote="FenixAudio" data-source="post: 7010864" data-attributes="member: 622195"><p>the amp to lead should be fine to run a led. run a relay if you want too. its easy.</p><p></p><p>87 to 12v constant with higher currnet then the lights</p><p></p><p>86 to your amp to wire since the relay switch at 250ma you should be fine</p><p></p><p>85 to gnd</p><p></p><p>30 to the lights.</p></blockquote><p></p>

Verification

Top

Menu