Reply to thread

Message

<blockquote data-quote="91caprice" data-source="post: 6789383" data-attributes="member: 614442">well i finally got the parameters directly from Bryan(owner of AA)heres what they areaa12v1OD = 12.519&quot;ID = 11.181&quot;MD = 5.905&quot;Displacement:0.146 cu.ft.-Mechanical Parameters-parallelFS&nbsp; &nbsp;&nbsp; 33.22HzQms&nbsp;&nbsp; 4.173Vas&nbsp; &nbsp; 50.22litersCms&nbsp;&nbsp; 0.135mm/NMms&nbsp; 171.1gRms&nbsp;&nbsp; 8.505kg/sXmax&nbsp; 12.0mmP-dia&nbsp;&nbsp; 255mmSd&nbsp; &nbsp;&nbsp; 0.0511sq.mP-Vd&nbsp; 0.613liters-Electrical Parameters-Qes&nbsp;&nbsp; 0.674Re&nbsp; &nbsp;&nbsp; 1.6ohmsLe&nbsp; &nbsp; &nbsp; 1.17mHZ&nbsp; &nbsp; &nbsp;&nbsp; 2.0 ohmsBl&nbsp; &nbsp; &nbsp; 9.168Tm-Electromech. Parameters-Qts&nbsp; &nbsp; 0.581no&nbsp; &nbsp;&nbsp; 0.263%1-W SPL&nbsp;&nbsp; 87.10db2.83-V SPL&nbsp;&nbsp; 93.64dbEfficiency Bandwith Product&nbsp;&nbsp; 43hzSealed&nbsp; 1.5cuftported&nbsp; 2.37cuft (Fb 36.82hz, F3 32.77hz)square por&nbsp; 14sqin X 10&quot;dround port&nbsp;&nbsp; 4&quot;dia X 8.75&quot;d</blockquote>

[QUOTE="91caprice, post: 6789383, member: 614442"] well i finally got the parameters directly from Bryan(owner of AA) heres what they are aa12v1 OD = 12.519" ID = 11.181" MD = 5.905" Displacement: 0.146 cu.ft. -Mechanical Parameters-parallel FS 33.22Hz Qms 4.173 Vas 50.22liters Cms 0.135mm/N Mms 171.1g Rms 8.505kg/s Xmax 12.0mm P-dia 255mm Sd 0.0511sq.m P-Vd 0.613liters -Electrical Parameters- Qes 0.674 Re 1.6ohms Le 1.17mH Z 2.0 ohms Bl 9.168Tm -Electromech. Parameters- Qts 0.581 no 0.263% 1-W SPL 87.10db 2.83-V SPL 93.64db Efficiency Bandwith Product 43hz Sealed 1.5cuft ported 2.37cuft (Fb 36.82hz, F3 32.77hz) square por 14sqin X 10"d round port 4"dia X 8.75"d [/QUOTE]

Verification