Reply to thread

Message: <blockquote data-quote="audiobaun" data-source="post: 8858827" data-attributes="member: 634282"><p>I would run a 150x4 or 200x4 .. 4ch amp and depending on the amp for the money maybe like a 60x2 2 ch or it may be easier to find a 4 ch x 80 or 50 and run 2 chs to tweets @ 4 ohm with 2 ch free for future use. There are some 2 ch out there decent for the $. I doubt you will find a decent 6 ch with the power needed for the Mids you are wanting to run, that wouldnt be very inexpensive. I would only wire 2 chs @2ohms for the same pair of speakers and ohms value along with RMS rating in each door rather than a mixture. Thats me though</p></blockquote><p></p>

Top