Reply to thread

Message: <blockquote data-quote="zako" data-source="post: 8149425" data-attributes="member: 629735"><p>Since the subwoofer is D2, you probably want to wire the voice coils in series, for final 4ohm impedance. At this point, bridging a couple of channels seems like a logical choice. I'd recommend a PPI P900.4, which should give you an honest 450watt RMS output with 14.4 volts when bridged. It worked fine as a subwoofer amplifier for me, with effectively no ventilation around the case, it still run warm but not hot.</p></blockquote><p></p>

Top