Reply to thread

Message

<blockquote data-quote="Blown Camaro" data-source="post: 8545146" data-attributes="member: 671889">I did put 6x9 in the kickpanels which gives me lots of mid bass. So here is what I did last night and it seems to have helped but I sure wish I had someone local to give a listen as I don&#039;t really know what it should sound like!Front and rear 6x9&#039;s on the rear channel of a 4 channel amp - so I can cross them independently of the front channel. 63hz HPF (head unit only has 50/63/80/100/120). On the amp I then set this channel at 250hz LPF (as high as it can go unfortunately on this amp). So the 6x9&#039;s are now band passed and I do NOT hear the tweeters anymore. Now I can hear the dash speakers! Next, I crossed the 4&quot; coaxials in the dash vents at 120 HPF on the amp. So the fader controls the HEIGHT of the soundstage now. The 12&quot; sealed subs were at 80hz but 100hz sounds much louder now so that is where they are set. I am pretty happy with this. Tweeters are on front top of door panels and passively crossed at 3k. This needs to be amped I can&#039;t hear them well.Am I on the right track on my tuning?</blockquote>

[QUOTE="Blown Camaro, post: 8545146, member: 671889"] I did put 6x9 in the kickpanels which gives me lots of mid bass. So here is what I did last night and it seems to have helped but I sure wish I had someone local to give a listen as I don't really know what it should sound like! Front and rear 6x9's on the rear channel of a 4 channel amp - so I can cross them independently of the front channel. 63hz HPF (head unit only has 50/63/80/100/120). On the amp I then set this channel at 250hz LPF (as high as it can go unfortunately on this amp). So the 6x9's are now band passed and I do NOT hear the tweeters anymore. Now I can hear the dash speakers! Next, I crossed the 4" coaxials in the dash vents at 120 HPF on the amp. So the fader controls the HEIGHT of the soundstage now. The 12" sealed subs were at 80hz but 100hz sounds much louder now so that is where they are set. I am pretty happy with this. Tweeters are on front top of door panels and passively crossed at 3k. This needs to be amped I can't hear them well. Am I on the right track on my tuning? [/QUOTE]

Verification