Reply to thread

Message: <blockquote data-quote="shellshocked" data-source="post: 1064852" data-attributes="member: 561983"><p>Just a lesson learned.  My amp is rated 2 ohm stable so I wired the sub for 2 ohms and connected it in bridge mode.  Amp protection kept tripping at high volumes.  Went through the fine print in the installation guide and what do you know! - in bridge mode the amp is rated for 4-8 ohms.  Rewired the sub and bingo!  Big improvement and no tripping.  They write those manuals for a reason - next time I will read it in detail and save some headaches.</p></blockquote><p></p>

Top