Reply to thread

Message

<blockquote data-quote="medik13" data-source="post: 2990532" data-attributes="member: 570412">What is the mounting diameter and depth of those cadence mids?I am possibly thinking of taking advantage of this HU and all of its features buy going active. I would add another ZEd amp &quot;Gladius&quot; for the single 10&quot;, and use the Draconia for the tweeters and mids. What would be a killer active diy speaker setup? I was looking at madisound.com, but they have alot of choices. I have also searched and read minivanman&#039;s posts about going active, so I am getting a better understanding.I am also going to need help with X-over settings and slopes to set.The midbass driver needs to have a 5.5&quot;-5.75 or up to 145mm cutout diameter, anything more and I will need to cut a hole in my door. The mounting locations for the drivers are in the stock door location. The are mounted flat on the door and are positioned slightly in front of the driver and facing the legs. The tweeters are placed flat (no swivel or angle) about 12&quot; above the midrange facing toward the legs too. I have the option of raising the tweeter to the sail panel and angling them toward the drivers head. Would this be better?Please help me with this DIY set or advise me if a passive would be more beneficial for me.</blockquote>

[QUOTE="medik13, post: 2990532, member: 570412"] What is the mounting diameter and depth of those cadence mids? I am possibly thinking of taking advantage of this HU and all of its features buy going active. I would add another ZEd amp "Gladius" for the single 10", and use the Draconia for the tweeters and mids. What would be a killer active diy speaker setup? I was looking at madisound.com, but they have alot of choices. I have also searched and read minivanman's posts about going active, so I am getting a better understanding. I am also going to need help with X-over settings and slopes to set. The midbass driver needs to have a 5.5"-5.75 or up to 145mm cutout diameter, anything more and I will need to cut a hole in my door. The mounting locations for the drivers are in the stock door location. The are mounted flat on the door and are positioned slightly in front of the driver and facing the legs. The tweeters are placed flat (no swivel or angle) about 12" above the midrange facing toward the legs too. I have the option of raising the tweeter to the sail panel and angling them toward the drivers head. Would this be better? Please help me with this DIY set or advise me if a passive would be more beneficial for me. [/QUOTE]

Verification