Reply to thread

Message

<blockquote data-quote="evenflow76" data-source="post: 5046814" data-attributes="member: 598846">HEy guys, first post after a bunch of searching and confusion so i though i would ask for some help.&nbsp; I have two RE Audio SE&#039;s in a 1.25 cubic foot per chamber split sealed box powered by a Cadence Z1000 amp in my 04 Tahoe.&nbsp; The subs absolutly have no top end bass whatsoever, they seem to be peeking at about 45hz and are just plain ignorant trom 50hz down but above they are fall flat to the point you may not notice there are subs there. I listen to mostly rock music and am lookin for that punch ya in the head kick drum and i am not feelin it at all with the sealed box setup and these subs so far.Most of the threads go back and forth on wether the SE&#039;s should be sealed or ported and i havent seen anything that refers to a bigger vehicle and this senerio so i thought i would ask on some opinions that will get me some good high bass kick drum SQ out of these subs or am i barking up the wrong tree by using the SE&#039;s?</blockquote>

[QUOTE="evenflow76, post: 5046814, member: 598846"] HEy guys, first post after a bunch of searching and confusion so i though i would ask for some help. I have two RE Audio SE's in a 1.25 cubic foot per chamber split sealed box powered by a Cadence Z1000 amp in my 04 Tahoe. The subs absolutly have no top end bass whatsoever, they seem to be peeking at about 45hz and are just plain ignorant trom 50hz down but above they are fall flat to the point you may not notice there are subs there. I listen to mostly rock music and am lookin for that punch ya in the head kick drum and i am not feelin it at all with the sealed box setup and these subs so far. Most of the threads go back and forth on wether the SE's should be sealed or ported and i havent seen anything that refers to a bigger vehicle and this senerio so i thought i would ask on some opinions that will get me some good high bass kick drum SQ out of these subs or am i barking up the wrong tree by using the SE's? [/QUOTE]

Verification