Reply to thread

Message

<blockquote data-quote="Psyence" data-source="post: 1091114" data-attributes="member: 562684">Uhmm... What other choice does the air have but to exit the ports? Everywhere else is sealed 100%... I dont understand your logic here. Air will go anywhere it CAN go.. and the ONLY place it can go in this enclosure is out the ports.He is on his way as we speak, so we will have the big test in a couple hours for sure... I still have to install T-Nuts, and run the wiring...Time will tell... afterall, its what it sounds like to the user that is most important.In regards to my setup... I cant face anything to the rear because of how the box will be made... so the only choices are out the front or top... which is recommended overall?Also, what is the optimal enclosure size for the 12&quot; Type R, running at 1000W RMS (MRD-M1005)?These are the only 2 questions i need answered... If you could give me a hand that would be great.</blockquote>

[QUOTE="Psyence, post: 1091114, member: 562684"] Uhmm... What other choice does the air have but to exit the ports? Everywhere else is sealed 100%... I dont understand your logic here. Air will go anywhere it CAN go.. and the ONLY place it can go in this enclosure is out the ports. He is on his way as we speak, so we will have the big test in a couple hours for sure... I still have to install T-Nuts, and run the wiring... Time will tell... afterall, its what it sounds like to the user that is most important. In regards to my setup... I cant face anything to the rear because of how the box will be made... so the only choices are out the front or top... which is recommended overall? Also, what is the optimal enclosure size for the 12" Type R, running at 1000W RMS (MRD-M1005)? These are the only 2 questions i need answered... If you could give me a hand that would be great. [/QUOTE]

Verification