Reply to thread

Message

<blockquote data-quote="Incudie" data-source="post: 3673547" data-attributes="member: 582795">Hey Guys/Girls,I have been putting this project together for a while (First install for me)I have the following:1x Rainbow IPaul 4.300 Amp <a href="http://car.rainbow-audio.de/products/introduction.php?lan=2&amp;amp;pro=3&amp;amp;lin=22" target="_blank">Tech Data</a>1x Rainbow CMX 265 Kicks with Cal 25 Tweeters <a href="http://car.rainbow-audio.de/products/introduction.php?lan=2&amp;amp;pro=1&amp;amp;lin=6" target="_blank">Tech Page</a>I am getting ready to wire everything up and give it a shot and was hoping someone could look over my diagram and agree or disagree that I have this planned out correctly.The speakers are 4 Ohm speakers and I am hoping (under the impression of my diagram) that I will have 270 Watts Available to each side (side meaning each x-over).My understanding is (which I could use clarification on) is that a speaker requiring a maximum of 150 watts can be given as many watts from the amp, but the speaker will only use what is needed. In this case (if my diagram is correct). I am hoping to be making available 270 watts to a 150 watt speaker.<img src="http://i6.photobucket.com/albums/y223/incudie/AmpDrawling.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Any opinions are greatly appreciated ^_^Thanks a lot!--Incudie</blockquote>

[QUOTE="Incudie, post: 3673547, member: 582795"] Hey Guys/Girls, I have been putting this project together for a while (First install for me) I have the following: 1x Rainbow IPaul 4.300 Amp [URL="http://car.rainbow-audio.de/products/introduction.php?lan=2&pro=3&lin=22"]Tech Data[/URL] 1x Rainbow CMX 265 Kicks with Cal 25 Tweeters [URL="http://car.rainbow-audio.de/products/introduction.php?lan=2&pro=1&lin=6"]Tech Page[/URL] I am getting ready to wire everything up and give it a shot and was hoping someone could look over my diagram and agree or disagree that I have this planned out correctly. The speakers are 4 Ohm speakers and I am hoping (under the impression of my diagram) that I will have 270 Watts Available to each side (side meaning each x-over). My understanding is (which I could use clarification on) is that a speaker requiring a maximum of 150 watts can be given as many watts from the amp, but the speaker will only use what is needed. In this case (if my diagram is correct). I am hoping to be making available 270 watts to a 150 watt speaker. [IMG]http://i6.photobucket.com/albums/y223/incudie/AmpDrawling.png[/IMG] Any opinions are greatly appreciated ^_^ Thanks a lot! --Incudie [/QUOTE]

Verification