Reply to thread

Message

<blockquote data-quote="cdf294" data-source="post: 3263684" data-attributes="member: 579365">Now I feel like a real idiot- I can program my Theta CasaNova processor (which was a real PITA) but I can&#039;t figure out these crossovers.I just received a pair of Rainbow Germanium comps. I did not receive any info on wiring the crossovers or info for jumpers on the crossovers- I bought these used.The first thing I notice is that the inputs for the crossovers are bi amp capable. If I were bi-amping, I would just go active.So my question is: how do I hook these inputs up using only 1 channel per crossover?Can anybody shed any insight as to the adjustments on these crossovers?I went to Rainbow&#039;s site but found nothing to answer these questions.I will email the company to see if I can get some info but would at least like to get some tunes hooked up in the mean time.I appreciate any help you can provide.Thanks.</blockquote>

[QUOTE="cdf294, post: 3263684, member: 579365"] Now I feel like a real idiot- I can program my Theta CasaNova processor (which was a real PITA) but I can't figure out these crossovers. I just received a pair of Rainbow Germanium comps. I did not receive any info on wiring the crossovers or info for jumpers on the crossovers- I bought these used. The first thing I notice is that the inputs for the crossovers are bi amp capable. If I were bi-amping, I would just go active. So my question is: how do I hook these inputs up using only 1 channel per crossover? Can anybody shed any insight as to the adjustments on these crossovers? I went to Rainbow's site but found nothing to answer these questions. I will email the company to see if I can get some info but would at least like to get some tunes hooked up in the mean time. I appreciate any help you can provide. Thanks. [/QUOTE]

Verification