Reply to thread

Message: <blockquote data-quote="prodgod" data-source="post: 4413684" data-attributes="member: 574445">The sub should have a set of push terminals on the back of the sub, you just strip some wire, push down the terminals and put the wire in.  As for wiring to the terminal cup, those usually have spade termainals on the back, you can either crimp on some female ends on the wire and push them on, of you can solder the wire directly to the spades.Edit: The back of the terminals might have a set of studs with nuts.  If that's the case, you can crimp on some ring terminals and bolt them down.  All depends on the type of terminal cup they put in it.</blockquote>

Top