Reply to thread

Message: <blockquote data-quote="B_Master_Flash" data-source="post: 652839" data-attributes="member: 552262"><p>if you put a 2 ohm impedence on the amp it can damage the amp, and the amp can damagae the sub.  you can try one coil bridged @ 600w, but that will blow the sub if you power it fully or you can try the sub @ 2 ohms plugged into one channel @ 300w.  Or if you dont really care about the life of your sub or amp you can bridge 2 ohms and see what happens. best would be to get the 2ohm DVC</p></blockquote><p></p>

Top