Reply to thread

Message

<blockquote data-quote="Jeffdachef" data-source="post: 8283180" data-attributes="member: 650438"><img src="http://i.imgur.com/XdFpgaM.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />top &amp;amp; bot: 19&quot;D x 35&quot;wsides: 19&quot;D x 14&quot;Hfront and back: 33.5&quot;W x 14&quot;H2nd baffle 35&quot;w x 15.5&quot;HBrace 1-4: 5&quot; x 14&quot;HBrace 5-8 : 3&quot; x 17.5&quot;D(optional) Aeroport Brace 8&quot; x14&quot;HAeroport (6&quot; x 13.75&quot;) x2After accounting all the other bracing in, your at 4.52 cubic feet you still need .12 cubic feet of additional bracing via 45 degree cuts (Measurements N/A) that, you gotta do yourself,&nbsp; but with all 4 corners done, it should give you the proper volume so your tuning would be around 33-34 If you dont want to do 45s, you can add your own bracing elsewhere to compensate maybe some triangles/squares at the corners.final specs 3.95-4.05 cubic feet net, 32-33 hztuning got a little bit lower then expected since i had to give you room to fit the flares on your ports.I&#039;d recommend attaching the port to the 1st baffle and have a flush fit with the 2nd one or else your tuning is going to go down to 31hz.</blockquote>

[QUOTE="Jeffdachef, post: 8283180, member: 650438"] [IMG]http://i.imgur.com/XdFpgaM.png[/IMG] top & bot: 19"D x 35"w sides: 19"D x 14"H front and back: 33.5"W x 14"H 2nd baffle 35"w x 15.5"H Brace 1-4: 5" x 14"H Brace 5-8 : 3" x 17.5"D (optional) Aeroport Brace 8" x14"H Aeroport (6" x 13.75") x2 After accounting all the other bracing in, your at 4.52 cubic feet you still need .12 cubic feet of additional bracing via 45 degree cuts (Measurements N/A) that, you gotta do yourself, but with all 4 corners done, it should give you the proper volume so your tuning would be around 33-34 If you dont want to do 45s, you can add your own bracing elsewhere to compensate maybe some triangles/squares at the corners. final specs 3.95-4.05 cubic feet net, 32-33 hz tuning got a little bit lower then expected since i had to give you room to fit the flares on your ports. I'd recommend attaching the port to the 1st baffle and have a flush fit with the 2nd one or else your tuning is going to go down to 31hz. [/QUOTE]

Verification