Reply to thread

Message: <blockquote data-quote="MiniVanMan" data-source="post: 2901214" data-attributes="member: 573252">A passive crossover does exactly that.  You need to figure out the frequency you want to cut.  Then find a crossover calculator somewhere online to calculate the value for the components you'll need.For a 6 db per ocatve cut, you would use just one capacitor.  If you wanted a steeper slope you would use a capacitor in series and an inductor in parallel.I'd say a just a simple 6 db slope cut at about 100-120 hz will probably do what you're looking for.</blockquote>

Top