Reply to thread

Message: <blockquote data-quote="WulfComp" data-source="post: 3354719" data-attributes="member: 572301"><p>well, to turn on the PSW you need to jump the (most of the time)-green wire with a black if you look at the ATX plug, with the clip facing you and wires up it should be the 4th wire from the left. again should be green, but have seen it other colors. Black is your neg. Yellow is your +12v red is your +5v  That should do it, just make sure your fans are working. Good luck</p></blockquote><p></p>

Top