Reply to thread

Message

<blockquote data-quote="Greg200SE-R" data-source="post: 864032" data-attributes="member: 560729">Hey, I have the same thing happen on mine... sounds really messed up with custom mode on.&nbsp; BUT, you don&#039;t need custom mode on to use auto EQ.&nbsp; Here is what I did after downloading settings to the memory stick:On your deck, go to Sound Settings and hit enter, the file name should show up on screen.&nbsp; Select the one you want and it will tell you to save to a preset 1-5.&nbsp; The auto settings will be copied from the memory stick to your deck.&nbsp; To call them up, you have to go to PEQ and simply hit the preset number you want.&nbsp; You&#039;ll see the EQ curve change from flat to the auto-setting when you do.&nbsp; Hope this helps.As far as the auto-EQ, the only thing I noticed is, if you click on &quot;custom&quot; while on e-iserv, the auto EQ correction curve does NOT download to your memory stick.&nbsp; Even if you see the auto EQ curve on e-iserv, as soon as you click custom it won&#039;t download the correction curve.&nbsp; You can check by referencing the manual to decode the downloaded file name - the letters and numbers indicate if the downloaded file is pro/normal-mode, 3-way or 2-way mode, or if auto-EQ correction was used.I couldn&#039;t figure out what the hell custom mode is for.&nbsp; Turning it on w/the deck seemed to turn off my rear speakers, and send a distorted, full-range signal to the sub which is delayed by a full 1-2 seconds...&nbsp; If you figure out what custom is for please post it here!</blockquote>

[QUOTE="Greg200SE-R, post: 864032, member: 560729"] Hey, I have the same thing happen on mine... sounds really messed up with custom mode on. BUT, you don't need custom mode on to use auto EQ. Here is what I did after downloading settings to the memory stick: On your deck, go to Sound Settings and hit enter, the file name should show up on screen. Select the one you want and it will tell you to save to a preset 1-5. The auto settings will be copied from the memory stick to your deck. To call them up, you have to go to PEQ and simply hit the preset number you want. You'll see the EQ curve change from flat to the auto-setting when you do. Hope this helps. As far as the auto-EQ, the only thing I noticed is, if you click on "custom" while on e-iserv, the auto EQ correction curve does NOT download to your memory stick. Even if you see the auto EQ curve on e-iserv, as soon as you click custom it won't download the correction curve. You can check by referencing the manual to decode the downloaded file name - the letters and numbers indicate if the downloaded file is pro/normal-mode, 3-way or 2-way mode, or if auto-EQ correction was used. I couldn't figure out what the hell custom mode is for. Turning it on w/the deck seemed to turn off my rear speakers, and send a distorted, full-range signal to the sub which is delayed by a full 1-2 seconds... If you figure out what custom is for please post it here! [/QUOTE]

Verification