Reply to thread

Message

<blockquote data-quote="Colt9699" data-source="post: 2274817" data-attributes="member: 562705">i have a 1999 mercury villager with power locks and i bought a Crimestopper cs-865rke series IITrouble I am having is when i push the lock/unlock button on the remote the lights flash but the locks dont work.I believe it is all connected correctly, I got the vehicle wiring diagram from <a href="http://www.the12volt.com" target="_blank">www.the12volt.com</a> and used the install mnanual for the keyless entry.anyone with any experience with crimestopper or any keyless entry please let me know if there is something i didnt do right.i have the wires hooked up like this:blue/black unlock output connected to the vehicles unlock wire (red/white)violet and violet/w black are groundedgreen /w black is connected to the vehicles Lock wire(red)&#039;I assume since the lights flash and the led are working correctly the other harness is connected correcct (power and ground and such)</blockquote>

[QUOTE="Colt9699, post: 2274817, member: 562705"] i have a 1999 mercury villager with power locks and i bought a Crimestopper cs-865rke series II Trouble I am having is when i push the lock/unlock button on the remote the lights flash but the locks dont work. I believe it is all connected correctly, I got the vehicle wiring diagram from [URL="http://www.the12volt.com"]www.the12volt.com[/URL] and used the install mnanual for the keyless entry. anyone with any experience with crimestopper or any keyless entry please let me know if there is something i didnt do right. i have the wires hooked up like this: blue/black unlock output connected to the vehicles unlock wire (red/white) violet and violet/w black are grounded green /w black is connected to the vehicles Lock wire(red)' I assume since the lights flash and the led are working correctly the other harness is connected correcct (power and ground and such) [/QUOTE]

Verification