Reply to thread

Message

<blockquote data-quote="iwanturmags" data-source="post: 4123348" data-attributes="member: 567870">More problems:Alright my current wires.Scosche:&nbsp; &nbsp;&nbsp; TO&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; HU:Black&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; BlackRed&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; RedYellow&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; YellowOrange&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Orange w/ white stripeSchosche: HU:Red: 12 volt ignition/switched&nbsp; &nbsp; &nbsp;&nbsp; TO&nbsp; &nbsp; Red +b (acc)Black: ground&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Black :&nbsp; GroundYellow: 12 volt battery/constant&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Yellow: BackupOrange: illumination/dimmer&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Orange white stripe : IlluminationBlue : amp remote turn-on&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Blue: amp turn onAlright so it&#039;s pretty straight forward. However, after connecting everything wich what I thought was properly some things happen.Loud popping noise when turning on/off headlightsExtreme light dimming when turning on the headlightsCD player will sit and make clicking noises and the hu flashes whenever the key is turned to acc/on (this started after i unplugged the illumination wire, no fuses blown anywhere i checked but it didn&#039;t do this 10 minutes ago), however as soon as the key is removed it will boot right up.I&#039;ve been at this for almost 4 hours straight I just cannot figure out what&#039;s going on..any help or even input or things to try would be helpful thanks.</blockquote>

[QUOTE="iwanturmags, post: 4123348, member: 567870"] More problems: Alright my current wires. Scosche: TO HU: Black Black Red Red Yellow Yellow Orange Orange w/ white stripe Schosche: HU: Red: 12 volt ignition/switched TO Red +b (acc) Black: ground Black : Ground Yellow: 12 volt battery/constant Yellow: Backup Orange: illumination/dimmer Orange white stripe : Illumination Blue : amp remote turn-on Blue: amp turn on Alright so it's pretty straight forward. However, after connecting everything wich what I thought was properly some things happen. Loud popping noise when turning on/off headlights Extreme light dimming when turning on the headlights CD player will sit and make clicking noises and the hu flashes whenever the key is turned to acc/on (this started after i unplugged the illumination wire, no fuses blown anywhere i checked but it didn't do this 10 minutes ago), however as soon as the key is removed it will boot right up. I've been at this for almost 4 hours straight I just cannot figure out what's going on..any help or even input or things to try would be helpful thanks. [/QUOTE]

Verification