Reply to thread

Message

<blockquote data-quote="Linkz" data-source="post: 4902477" data-attributes="member: 597000">ok, I&#039;m guessing you have a dual 4ohm kicker cvr. You can wire that for 2 ohm or 8ohm see this website: <a href="http://rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&amp;amp;woofer_qty=1&amp;amp;woofer_imp=4" target="_blank">http://rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&amp;amp;woofer_qty=1&amp;amp;woofer_imp=4</a>Running said speaker at 8 ohm would be far to expensive. There is no sacrafice to quality by running it at 2ohm. If you were to buy an additional 4ohm d2 woofer then you would be able to run it @ 1ohm. The speaker is rated for 400wrms/800w peak. therfore if you were to have 2 running you would need 800wrms @ 1ohm.the cheapest class D amp I have yet to find with decent quality is a BAMF power acoustik 2000d found here <a href="http://www.millionbuy.com/pakbamf20001d.html" target="_blank">http://www.millionbuy.com/pakbamf20001d.html</a>it will do 1200wrms @ 1ohm (their spec sheet is incorrect check the official website)that would give enough power for both of your speakers with low distortion (be sure to set your gains properly or risk blowing your speakers) It is also 1ohm stable.</blockquote>

[QUOTE="Linkz, post: 4902477, member: 597000"] ok, I'm guessing you have a dual 4ohm kicker cvr. You can wire that for 2 ohm or 8ohm see this website: [URL="http://rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=1&woofer_imp=4"]http://rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=1&woofer_imp=4[/URL] Running said speaker at 8 ohm would be far to expensive. There is no sacrafice to quality by running it at 2ohm. If you were to buy an additional 4ohm d2 woofer then you would be able to run it @ 1ohm. The speaker is rated for 400wrms/800w peak. therfore if you were to have 2 running you would need 800wrms @ 1ohm. the cheapest class D amp I have yet to find with decent quality is a BAMF power acoustik 2000d found here [URL="http://www.millionbuy.com/pakbamf20001d.html"]http://www.millionbuy.com/pakbamf20001d.html[/URL] it will do 1200wrms @ 1ohm (their spec sheet is incorrect check the official website) that would give enough power for both of your speakers with low distortion (be sure to set your gains properly or risk blowing your speakers) It is also 1ohm stable. [/QUOTE]

Verification