Reply to thread

Message

<blockquote data-quote="truckbump44" data-source="post: 7300824" data-attributes="member: 617728">ok so heres what happened i was moving my box with two AQ sd2.5 to reposition them with the volume faily low 20 40 is&nbsp; max when the bumping stopped and i noticed my amp in protect mode so i checked my connections and my wire came out of the terminal shorting the amp out hifonics bxi1610d so i shut off my truck reconnected wires and powered back up still in Pro mode so i disconnected rcas speaker and bass remote leaving only pwr remote and gnd still in pro mode i completely disconnectd the amp and waited 1 day to maybe reset it pwrd up still pro mode then i read to disconnect and touch + and - on the amp to release the charge and i did but still i pwrd up and still nothing i tested the transistors with my dmm + on the base and - on the emitter and collector and they all tested ok im pretty sure i did it right any feedback would be great i tried to be as descriptive as possiblethanks ryan</blockquote>

[QUOTE="truckbump44, post: 7300824, member: 617728"] ok so heres what happened i was moving my box with two AQ sd2.5 to reposition them with the volume faily low 20 40 is max when the bumping stopped and i noticed my amp in protect mode so i checked my connections and my wire came out of the terminal shorting the amp out hifonics bxi1610d so i shut off my truck reconnected wires and powered back up still in Pro mode so i disconnected rcas speaker and bass remote leaving only pwr remote and gnd still in pro mode i completely disconnectd the amp and waited 1 day to maybe reset it pwrd up still pro mode then i read to disconnect and touch + and - on the amp to release the charge and i did but still i pwrd up and still nothing i tested the transistors with my dmm + on the base and - on the emitter and collector and they all tested ok im pretty sure i did it right any feedback would be great i tried to be as descriptive as possible thanks ryan [/QUOTE]

Verification