Reply to thread

Message

<blockquote data-quote="skrilla22" data-source="post: 3974554" data-attributes="member: 579746">Ok so here it goes, i&#039;ll make it short and sweet. I installed my Rsd&#039;s not too long ago with my Kicker KX450 2 Channel. Was working fine for a while, then I started getting a little noise from the right tweeter, like the wire was grounding out or something. I took everything out added some damplifier and re wired everything and relocated the crossovers because in the door they were collecting some moisture.I got everything back in and installed and now i&#039;m having some issues. When I turn the volume up past about 20 (Pioneer P390MP), the whole front stage cuts out, I turn it down and it comes back on. I also did this while watching the amp, and its like its working fine with the green light then it goes in protection mode, then back to green, and so on.What could be the problem? I&#039;m pretty sure its not the speaker wiring, because I wired the amp to the subwoofer and it did the same exact thing. Today I replaced every fuse, replaced the 300A under the hood with a 150A, replaced the inline fuse after the distro block as well, checked the amp fuses and those are good too.I went to Car Toys and I told one of the guys and he came out to look and he said it&#039;s most likely my amp messing up.What do you guys think the problem is?Thanks in advance for your help.People who don&#039;t read:- Speakers and Amp working fine one day- Rewired, relocated crossovers, replaced fuses couple weeks later- Amp turns on fine, goes in protection mode after volume 20, turn it down speakers come back on</blockquote>

[QUOTE="skrilla22, post: 3974554, member: 579746"] Ok so here it goes, i'll make it short and sweet. I installed my Rsd's not too long ago with my Kicker KX450 2 Channel. Was working fine for a while, then I started getting a little noise from the right tweeter, like the wire was grounding out or something. I took everything out added some damplifier and re wired everything and relocated the crossovers because in the door they were collecting some moisture. I got everything back in and installed and now i'm having some issues. When I turn the volume up past about 20 (Pioneer P390MP), the whole front stage cuts out, I turn it down and it comes back on. I also did this while watching the amp, and its like its working fine with the green light then it goes in protection mode, then back to green, and so on. What could be the problem? I'm pretty sure its not the speaker wiring, because I wired the amp to the subwoofer and it did the same exact thing. Today I replaced every fuse, replaced the 300A under the hood with a 150A, replaced the inline fuse after the distro block as well, checked the amp fuses and those are good too. I went to Car Toys and I told one of the guys and he came out to look and he said it's most likely my amp messing up. What do you guys think the problem is? Thanks in advance for your help. People who don't read: - Speakers and Amp working fine one day - Rewired, relocated crossovers, replaced fuses couple weeks later - Amp turns on fine, goes in protection mode after volume 20, turn it down speakers come back on [/QUOTE]

Verification