Reply to thread

Message: <blockquote data-quote="Bake" data-source="post: 1004668" data-attributes="member: 561779"><p>you can bridge two of the channels and get 400 watts at four ohms. It is not rated to do two ohms bridged. then use the other two channels to drive, say, a component up front at 100 watts per channel at four ohms or  200 watts per channel at two ohms. Or bridge them for two 400 watt channels at four ohms each. Whew,, hope that made since to you and answered your question. Basically you can run two, three, or four channels.</p></blockquote><p></p>

Top