Reply to thread

Message: <blockquote data-quote="valin" data-source="post: 2958453" data-attributes="member: 567894"><p>Ok.  I checked out the RE site, and they're box building / port design page.  Their slot port heads the entire depth of the box, then the measurements are from there, out.  My old port in my box designed by memphis was simply 12" long......not an L shaped that heads in the depth, then 12".  Why would you do this, and why is that not considered the 12" + the depth.....so in my case over 24"?</p></blockquote><p></p>

Top