Reply to thread

Message

<blockquote data-quote="xNaStYx" data-source="post: 5964865" data-attributes="member: 589559">Well it all depends, if you are setting it up exactly as shown in the bottom part of that picture they you need to cut stuff. Don&#039;t just cut pieces so it fits, your box will sound like shit and most likely not come out the the right dimensions. If you are following that pictures then the two pieces you DONT have to fix are the front(where the hole for the sub and port are) and the back(opposite the front). Since they are both on the outer parts, they dont need to be cut. The top and bottom pieces need to be cut 1.5&quot; on the D side(As labeled on graph). So they should be 15.125x23.75. The two side pieces need to be cut on both sides 1.5&quot; so they are 15.5x15.125Also I forogt.. You would have to cut your port pieces down to 15.5&quot; height alsoSomeone correct me if im wrong.. its late and I did that all in my head //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif</blockquote>

[QUOTE="xNaStYx, post: 5964865, member: 589559"] Well it all depends, if you are setting it up exactly as shown in the bottom part of that picture they you need to cut stuff. Don't just cut pieces so it fits, your box will sound like shit and most likely not come out the the right dimensions. If you are following that pictures then the two pieces you DONT have to fix are the front(where the hole for the sub and port are) and the back(opposite the front). Since they are both on the outer parts, they dont need to be cut. The top and bottom pieces need to be cut 1.5" on the D side(As labeled on graph). So they should be 15.125x23.75. The two side pieces need to be cut on both sides 1.5" so they are 15.5x15.125 Also I forogt.. You would have to cut your port pieces down to 15.5" height also Someone correct me if im wrong.. its late and I did that all in my head [IMG]//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif[/IMG] [/QUOTE]

Verification