Reply to thread

Message: <blockquote data-quote="All_Logix" data-source="post: 7287940" data-attributes="member: 628274"><p>About to head into the construction of my first box, have a feeling its going to be a try this try that until I get what I want, but I did have a question about port effectiveness. I have done some calculations, and I want to use slot port because its easier and I don't want to be to ambitious, but from all my options the best one I have come across is a volume of 1.5 ft^3 with a port about 9.5" long, and 13.5" high...but to get it down to 32 Hz, it will only be about 1/2" wide... will having such a slim port effect the port output? Since the sealed recommendation is on .75 ft^3 I don't want the box to be to similar to sealed bit with way to much volume...</p></blockquote><p></p>

Top