Reply to thread

Message: <blockquote data-quote="Farside" data-source="post: 443572" data-attributes="member: 554476">I'll try to clarify..box is 22" x 14" x 16"The port opening and the sub are on the same side 22" x 14" with about 2" bewtween the widest part of the sub and the port.The port centerline goes about 10" into the box (in the same direction as the sub) then 90 Deg turn for another 12". for the last 6" of length the port runs behind the magnet about 1" away from it, is this going to mess things up?If I make the box 17" deep instead of 16" this will place the port 2" from the sub magnet and make the port about 2" shorter as well. so it will be 2" form the sub magnet for the last 4" or so of length...would this be a better option?Thanks,</blockquote>

Top